Fading and graphite nucleation sites in grey iron inoculated using silicon carbide

Autores

  • Ricardo Aristizábal
  • Paula Pérez Espitia
  • Ricardo Aristizábal Sierra

Resumo

The most commonly used inoculants for producing grey iron are ferrosilicon based, but also there are reports
indicating that silicon carbide can act as inoculant. There are few published studies of fading and nucleation
sites of graphite when silicon carbide is used as inoculant, thus the understanding of the inoculation effect of
silicon carbide is incomplete. To study these two aspects, fading and graphite nucleation sites, an ASTM
class 35B grey iron inoculated with silicon carbide was produced and characterized. The results were compared
with an ASTM class 35B grey iron inoculated with a ferrosilicon base inoculant and without inoculation.
It was found that the effect of the silicon carbide was comparable to the ferrosilicon base inoculant and
fading was similar. In addition, the graphite nucleation sites in the grey iron inoculated with silicon carbide
were irregular shaped manganese sulfides larger than the nuclei in the grey iron inoculated with ferrosilicon,
which suggest a similar nucleation mechanism for both inoculants.

Downloads

Publicado

2017-11-13

Edição

Seção

Artigos