A study of the metallic silver dissolution with the MEA-NH3-Cu system

Edith Reyes-Sandoval, Juan Carlos Fuentes-Aceituno

Resumo


Leaching of silver from minerals has been studied for decades. Recently, research has been focused on the
substitution of cyanide (because of its high toxicity) from hydrometallurgical operations. In this sense, the
development of alternative-green leaching solutions for the recovery of metallic silver from minerals and
urban mines is necessary. In this research, a thermodynamic-kinetic study of the alternative system “monoethanolamine
(MEA)-ammonium sulfate-cupric sulfate” was performed for the dissolution of metallic
silver, varying the pH and the cupric ion concentration at room temperature. Furthermore, this research aims
to evaluate the silver dissolution behavior at a pH lower than 10.2, elucidating the rate determining step of
the silver dissolution process at these conditions of pH and cupric ion concentration. Thermodynamic results
confirm that the MEA and NH3 can complex silver generating the species: Ag(MEA)2
+, AgMEA-,
Ag(NH3)2
+, AgNH3
+ respectively. It was evaluated the effect of varying the pH (8.8, 9.9 and 9) and the cupric
sulfate concentration (0.1, 0.15 and, 0.2 M at pH 9) on the kinetics of silver dissolution. The results revealed,
the possibility to leach a 39% of silver using a leaching solution containing: 0.15 M cupric sulfate, 0.05 M
MEA and 0.4 M ammonium sulfate at pH 9. The kinetic analysis showed that the silver dissolution is controlled
by the diffusion of fluid species through a porous layer composed of copper oxides, which was ratified
by SEM and EDS analysis. Finally the present paper, open the possibility to optimize the molar ratio
MEA:NH3 to maximize the silver dissolution kinetics.
Keywords: Leaching, metallic silver, MEA, ammonium.

Texto completo:

PDF

Apontamentos

  • Não há apontamentos.