Performance evaluation of titanium oxide deposited by electrophoresis in photoelectrodes of dye-sensitized solar cells

Authors

  • Antonio Paulo Santos Souza
  • Natália Macêdo Cavalcante
  • Francisco Nivaldo Aguiar Freire
  • Ana Fabíola Leite Almeida

Abstract

Nanoparticles of TiO2 have been the main semiconductor applied in Dye-sensitized solar cells (DSSCs). In this work, solar cells were developed from the electrophoretic deposition of anatase titanium dioxide (TiO2) films on conductive glasses. The electrophoretic deposition was perfomed with a constant voltage of 80V for 2 minutes and, after drying, the films were sintered at three different temperatures: 450 °C, 550 °C and 600 °C. In the assembly of the cells, the titanium dioxide films were sensitized by Ruthenizer 535-bisTBA dye (N719) and an electrolyte containing the iodide / tri-iodide redox pair and a commercial transparent platinum counter electrode were used. TiO2 films were characterized by scanning electron microscopy, dispersive energy spectroscopy and X-ray diffraction and photo-electrochemical techniques. The energy conversion rates were 0.2646% for the sintered film at 450 °C, 0.1209% for the sintered film at 550 °C and 0.1137% for the film sintered at 600 °C.

Keywords: Dye-sensitized solar cells. Electrophoresis. Titanium dioxide. Film.   Mesoporous. Photoanode. 

Published

2021-03-25

Issue

Section

Artigos