Copper slag from different dumps in the Atacama Region used in mortars as partial replacement of cement

Autores/as

  • Osvaldo Pavez
  • Amin Nazer
  • Oscar Rivera
  • Macarena Salinas
  • Bárbara Araya

Resumen

The use of copper slag as a partial substitute for cement in mortar preparation was studied. Copper slag
samples were collected from three dumps in the Atacama Region (Northern Chile). Mortars of 40x40x160
mm (width, height, length) and curing times of 7, 28 and 90 days were used in mechanical testing. Tests were
performed with 0% (control mortar), 5, 10, 15 and 20% copper slag as partial replacement of cement. The
results of mechanical tests showed a gradual increase in compressive and flexural strength at 7, 28 and 90
days in mortars containing copper slag when compared with the control mortar. The major differences
between the control and copper slag mortars are evident after 7 days, which indicates that the presence of
slag in the blends has a retardant effect on the hardening process. On the other hand, at 90 days, compressive
and flexural strength was very similar for both control mortar and mortars containing copper slag. Optimal
compressive and flexural strength values are achieved with 5% of cement substitution by copper slag. The
study concludes that the use of copper slag in mortars presents a viable alternative for partial cement
replacement, and also contributes to mitigate adverse environmental effects of copper mining.
Keywords: Copper slag, compressive strength, flexural strength, mortars.

Publicado

2019-09-25

Número

Sección

Artigos