Static bending of glulam beams manufactured with rubber wood and epoxy adhesive

Auteurs

  • Douglas Lamounier Faria
  • Thamirys Andrade Lopes
  • Mário Vanoli Scatolino
  • Julio Soriano
  • Lourival Marin Mendes
  • José Benedito Guimarães Júnior

Résumé

The aim of this study was to evaluate the properties of Hevea brasiliensis wood wastes for production structural pieces of glued laminated (glulam) timber. Three trees with age close to 25 years and diameter at breast height (DBH) higher than 500 mm were obtained. The basic density of the wood were quantified, as well as the stiffness and the strength in static bending, shear strength and parallel compression to grain and hygroscopic equilibrium moisture. The beams of glulam were evaluated according to the modulus of elasticity (MOE), modulus of rupture (MOR) and delamination. Due to the bending properties MOR (75.14 MPa) and MOE (8166.79 MPa), as well as the shear strength (12.29 MPa) obtained, was concluded by the suitability of the rubber wood for the production of glulam beams. The composite beams presented values of MOR (75.14 MPa) and MOE (8166.79 MPa) compatible with species traditionally used in the production of glulam beams. The adhesive bond quality was verified by the delamination test, presenting delamination of 4.95 %, indicating its use for internal and external environments.

Keywords: Composite; Wood; Bond resistance; Static bending.

Téléchargements

Publiée

2020-09-22

Numéro

Rubrique

Artigos